Jump to content

Another Minto Park Raceway


teamredracing

Recommended Posts

Hi guys , have finished another Minto Park Raceway .Cant keep up with how many this is. Some will be happy to know that there is no bog in it at all. It does slightly resemble the old track with a few differences . Sweeper have been moved and a few tight turns put in.

Total length is 16.7mtrs on all lanes .Board is now 4.2 long by 2.0 mtrs wide thanks to Gazza for welding it up. Base board is mainly 3 ply and masonite with the track being 9mm . Surface is a light grey suede and 1 coat of clear thanks to Mel (OTFS) . Braid was from SlotsNZ (Mark).And a few hours put in by my boys . Thanks to all ,hope the track rubbers up well cause I'm not building another(well not for a little while any way) as per SWMBO .Some times have been put down ,around the 6.5,6.3's but know it will get better with time. So here are some pics. Will put up a vid at a later date.

 

1MintoParkRaceway.jpg

 

2.jpg

 

5.jpg

 

10.jpg

 

13.jpg

 

14.jpg

 

21.jpg

 

 

 

22Plaintimber.jpg

 

Drivers Stations

24DriversStation.jpg

 

Making sure I can race trucks

29Bridgeheight.jpg

 

Now undercoated

33Undercoated.jpg

 

Suede now painted

40firstcoatofSuede.jpg

 

Braid down

52Braiddown.jpg

55Readytorunnearlyfinished.jpg

 

Quick grow grass and ready for racing

56TopGrassed.jpg

57BottomGrassed.jpg

 

Have put a few homeys and cars around the track since these pics were taken.

As I said I'll put up a vid soon

Craig

 

"You can please all of the people some of the time, but you can’t please all of the people all of the time”.

Link to comment
Share on other sites

Looks pretty neat Craig. Looking forward to racing on it. BTW you have the controller plugs on upside down - ask Joe and Caddo ;)

I can't believe that I wanted to grow up

 

Mount Salt Panorama Track Combined Road and Rally Track built near Salt Pan Creek Padstow - Sydney

 

A quick build rally track

 

2017 WRP Round 11 at Mt Salt Panorama

 

https://i128.photobu...zpss7sqiwfj.jpg

Link to comment
Share on other sites

Thanks guys ,Mel I looked at the ones on the wall and thought thats the way I want them :D . I since swapped the blue and the red lanes around as it was a bit difficult seeing the bottom part of the track . Hey bandit ,I'll put the track up against the wall and show you when I actually started it back in Dec 2011. I was going to post everything up as how to build a track in a day, which would have worked out fine as the last pic of the track was taken about 7.30 -8.00pm at night :D . No probs Viv if you can wait 8 months I'll have it finished for you. Yes Joe NO BOG, I'll even let you run a magnet over it to see if you can find any :huh::P:lol: . And no sqeezes either. Charlie ,your going to have to come over before you ship out .

Edited by teamredracing

Craig

 

"You can please all of the people some of the time, but you can’t please all of the people all of the time”.

Link to comment
Share on other sites

High enough for you to drive your normal way and launch you cars off. If you notice Stu its not the sweeper of old . I made the fencing high enough that no car will be able to use it as an advantage. Tried the likes of the Slot it Jags and the rear wing will get hung up on it and there you'll stay. Outside lane to fencing is 100mm so if you want to try and use it as leverage with any other non winged car be my guest but you'll loose about 2-3 sec's every time you do. Even the trucks are handicapped as the left ,right changes on the bridge and the hairpins are there let downs.

Edited by teamredracing

Craig

 

"You can please all of the people some of the time, but you can’t please all of the people all of the time”.

Link to comment
Share on other sites

Heres the vid I promised . Taken from the phone on top a of a fridge at about 8.00pm at night.First car is the Slot it Bud Light Jag ,then the Sisu truck and finally the Scx Aston Martin. Track was cold so traction was down a bit.

th_video-2012-08-16-19-54-34.jpg

Craig

 

"You can please all of the people some of the time, but you can’t please all of the people all of the time”.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...