gazza Posted August 8, 2025 Report Share Posted August 8, 2025 Been playing with a couple of buildings for a couple of guys over here that run HO tracks I've downloaded HO buildings before and just scaled them up for 1/32nd layout But this is the first time i've printed them just for HO Pretty happy with the way they have turned out The Dunlop Footbridge i had printed before in 32nd scale I scaled it down to fit a 4 lane AFX setup ...... found the AFX logo and fitted it to the bridge The Jim Beam building is all HO ..... https://www.thingiverse.com/kabrumble/designs Easy to print with lots of pieces that fit very neatly Found a HO scale truck that went well with the building .... Also did a bit of playing around with barrels and keychain logos to make the outside display, the trucks and barrels are Resin the rest are PLA. It's going to look great on the new track that is being built. Quote Quickly read this post before it is deleted or i turn grey again Gary http://www.facebook.com/Rallyproxy2017 Link to comment Share on other sites More sharing options...
ZeGas Posted August 8, 2025 Report Share Posted August 8, 2025 they're lovely Gazza, nice paintwork too. Quote Cheers Grant . 2025 - Mad Man Motoring (Triple M) Proxy - Group 5 - 1:32 & 1:43 https://auslot.com/forums/index.php?/topic/37451-2025-mad-man-motoring-triple-m-proxy-group-5-132-143/ __________________________________________________________________________________________________________________________________________________ If life gives you lemons, take them, free s#!t is cool. Link to comment Share on other sites More sharing options...
Vinno Posted August 8, 2025 Report Share Posted August 8, 2025 Bloody brilliant Gaz. Quote Link to comment Share on other sites More sharing options...
gazza Posted August 20, 2025 Author Report Share Posted August 20, 2025 Been playing with a couple more structures American style country house Miners Cottage If you think it looks familiar it's because it is This is the original size, i enlarged it to 1/32nd scale a few years back to fit in with the rally track and lastly (for a while) a Picnic area and i found a couple of windmills as well 1 Quote Quickly read this post before it is deleted or i turn grey again Gary http://www.facebook.com/Rallyproxy2017 Link to comment Share on other sites More sharing options...
Vinno Posted August 20, 2025 Report Share Posted August 20, 2025 The HO house would make a good cubby house for the 1/32 house. 1 Quote Link to comment Share on other sites More sharing options...
gazza Posted September 22, 2025 Author Report Share Posted September 22, 2025 Added a Dunlop walkway to the HO builds, spans a 4 lane with a little room to spare. Can also act as a start finish gantry Quote Quickly read this post before it is deleted or i turn grey again Gary http://www.facebook.com/Rallyproxy2017 Link to comment Share on other sites More sharing options...
gazza Posted February 26 Author Report Share Posted February 26 Came across a modular pit area for 32nd scale, after a far bit of tweaking got it down to 72nd scale, the area for the pits is around 700mm so made up 10 bays at around 660mm Also shrank down the containers i had printed for 32nd scale and are good for track advertising Or to carry around a car Also modified a Grandstand file, put a centre brace in it and is now 280mm wide (build plate is 300mm) Quote Quickly read this post before it is deleted or i turn grey again Gary http://www.facebook.com/Rallyproxy2017 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.